PJSC Dnipro Metallurgical Plant (DMZ), part of DCH Steel, a group owned by businessman Oleksandr Yaroslavskyi, has completed its transition to continuous casting and has begun developing a new type of rolled product
According to information in the DCH Steel corporate newspaper, during the production campaign in November, 6,400 tons of products were manufactured in rolling mill No. 2.
It is specified that the rolling campaign lasted from November 12 to 22 without days off and was carried out in a very intense mode. Due to a decrease in orders, the shop worked on a two-shift schedule for the first time—it was necessary to manufacture a wide range of products and conduct important experiments. Constant air raid alerts and the risk of power outages complicated the work.
“It was one of the most intense campaigns in recent years. The workshop team was well prepared and successfully coped with the production tasks. They worked even faster than planned and did not allow significant overspending of energy resources,” said Yuriy Mikhailiv, Deputy General Director for Production and Technology.
According to him, during the campaign, a standard selection of channels from 14 to 30 was produced. In addition, 1,400 tons of channels were rolled according to European standards, as well as small volumes of 125 angles and SVP-22 mine props. Deliveries of billets to DMZ began two weeks before the start of production.
U100, U120, U140, and U160 channels were manufactured for the European market. Testing of rolls continued, a small batch of which the company purchased abroad in the summer. Based on the test results, the company plans to continue cooperation with the new supplier.
The shop also began mastering the production of Ø60 circles.
“The design of the 550 mill differs from those on which circles are usually manufactured. However, the experiment showed that the shop has the potential to produce this profile. We ran several blanks through the mill line and identified technical issues that need to be worked on. We will move forward step by step,” said Mikhailov.
The next production campaign in rolling shop No. 2 is planned for February.
As reported, DMZ reduced its rolled steel production by 23.1% in the first seven months of 2025 compared to the same period last year, to 26,000 tons.
In 2024, DMZ reduced rolled steel production by 59.4% compared to 2023, to 42.9 thousand tons, and coke production by 1.2%, to 289.1 thousand tons.
In 2023, DMZ increased its production of rolled metal by 86.2% compared to 2022, to 105,600 tons, and coke by 38.5%, to 292,700 tons.
In 2022, the plant reduced its production of rolled products by 74.2% compared to 2021, to 58.4 thousand tons, and coke by 56.3%, to 211.3 thousand tons.
DMZ specializes in the production of steel, cast iron, rolled products, and products made from them.
On March 1, 2018, the DCH Group signed an agreement to purchase the Dnipro Metallurgical Plant from Evraz.
